Autoclavable Digital Micro Pippete | Micropipette

1. Glass-made counter window: Volume display made of durable glass material protects the damage from UV irradiation and keep the pipette safer in clean bench even over a long time.
2. Lock mechanism: Designed with a lock mechanism,it is easier to adjust volume smoothly.
3. Body: Materials used for pipette body have high tolerance to solvents.
Non-grease designed. No need to worry about continuous autoclaving.
4. Ejector pipe: The ejector pipe fixed by a screw is easier to remove.
5. Plunger: Non corrosive ceramic used in the plunger. (200uL-10000uL)
6. Resin-made ejector pipe: Resin material of ejector pipe could enhance high tolerance to solvents.
7. Hyper Blower system: Hyper blower system improves dispensing efficiency, especially on 2μL and on 10μL dispensing.

Fully autoclavable. ( 121°C for 20 minutes )
Enhanced UV resistance.
Hyper Blower System, longer second - push stroke, improves dispensing efficiency.(2μL, 10μL)
Easy digital volume setting.
Easy and convenient single hand locking lever.
Eight sizes to cover a wide volume range. ( 0.1μL - 10000μL )
PTFE ( Fluorine resin ) is used in the airtight chamber of the instrument, so the instrument keeps its air tightness and precise reproducibility for long hours.
Ceramic plungers are used for volume models from 200μL to 10000μL.
Filtered Nozzles are used for volume models from 1000μL to 10000μL.
Tip ejector allows tip ejections without touching the tip.
Tip ejector is made of plastic to avoid damaging glass tubes.

This site uses cookies to optimise content, analyse our traffic.
We use also third party cookies (Google).